91Ë¿¹ÏÊÓÆµ

Rates

User fees are necessary in order to cover theÌýcosts of providing access to state-of-the-art instrumentation, including instrument maintenance, certain consumables, and compressed gases and liquids. Rates for MC2 instrument use depend on user category.Ìý If you would like to discuss a special project or collaboration, or you have questions about your bill, do not hesitate to contact us. Rates below may vary depending on work required to address clients' needs.

Mass spectrometryÌý Ìý Ìý Materials characterizationÌý Ìý ÌýÌýMicroscopy and imaging laboratoryÌý Ìý Ìý Magnetic resonanceÌý Ìý Ìý Thermal analysis and spectroscopyÌý Ìý Ìý X-ray diffraction


Mass spectrometry - Rates in effect July 1st 2025

INSTRUMENT - USAGE CATEGORY

ACADEMIC

WITH OPERATOR

INDUSTRY

WITH OPERATOR

MALDI (Autoflex III) -Ìýper sample $65 $100
GCMS -Ìýper sample $55 $90
GCMS -Ìýper hour $55 $90
API/AM (EXACTIVE) -Ìýper sample $55 $90
API/AM (MAXIS) -Ìýper sample $55 $90
LCMS -Ìýper hour $55 $90
LCMS data processing -Ìýper sample $20 $30
API (LCQ) -Ìýper sample $55 $90

Ìý

Materials characterizationÌý- Rates in effect July 1st 2025

Ìý

Brunauer-Emmett-Teller surface area measurements (BET)

USAGE CATEGORY ACADEMIC INDUSTRY
BET region only -Ìýper sample $40 $125
Full physisorption measurement -Ìýper sample $75 $225
Operator time -Ìýper hour1 $50 $125

1ÌýIncludes service (including activation and measurement) and full report (multipoint BET, sorption data, and pore size and volume calculated using BJH and DFT methods, and more by request). Analysis of approximately 4 samples per hour.

Ìý

Dynamic Light Scattering (DLS)

USAGE CATEGORY ACADEMIC INDUSTRY
With operator service -Ìýper hour $37.50 $90Ìý(plus consumables)
Without operator service1 -Ìýper hour $18 N/A
Data processing, operator service -Ìýper hour $60 $90
Training $60 N/A

1 Training required for independent instrument operation.

Ìý

Size Exclusion Chromatography (SEC)

USAGE CATEGORY

ACADEMIC

WITH OPERATOR

INDUSTRY

WITH OPERATOR

Aqueous phaseÌý- per run $20 $40Ìý(plus consumables)
Organic phaseÌý- per run $40 $75
Calibration curve $140 $300
System/sample preparation and data processing - per hour $75 $150

Dynamic Vapor Sorption (DVS)

USAGE CATEGORY ACADEMIC INDUSTRY
Humidity test (water) -Ìýper sample $40 $125
Other solvent (HPLC-grade) -Ìýper sample $50 $150
Operator time -Ìýper hour1 $50 $125
Training $50 N/A

1 Includes service and full report (humidity or solvent uptake, BET upon request, humidity, hysteresis, and more upon request). Analysis of approximately 4 samples per hour.

Ìý

Microscopy and imagingÌý-ÌýRates in effect July 1st 2025

Surface Probe Microscopy (AFM, STM) and Electron Microscopy (TEM, SEM)

USAGE CATEGORY ACADEMIC INDUSTRY
With operatorÌý-Ìýper hour $100 $300
Without operator -Ìýper hour1 $40 N/A
Data processing and analysis - per hour $50 $100

Training SPM1,2

$200 N/A
Training benchtopÌýTEM/SEM1,2 $100 N/A
Consumables (SPM probes, TEM grids, SEM stubs) Supplier rate Supplier rate

1ÌýTraining required for independent instrument operation. Includes data acquisition (on-line) and data processing/analysis (off-line) instruction. Duration 4-6+ hours divided over two separate sessions.

2ÌýFor users of the microscopy facility. Training without facility access, contact milab.chemistry [at] mcgill.ca (subject: Microscopy%20inquiry) (Mohini Ramkaran) for more details.

Ìý

Magnetic resonance -ÌýRates in effect July 1st 2025

Solution NMR

See below for the QANUC 800 MHz rates.

INSTRUMENT -ÌýUSAGE CATEGORY ACADEMIC INDUSTRY
Bruker 500, Bruker 400, Varian 500, QANUC 500, Varian 400 - without operator service, per hour $25 N/A
Mercury 300 - without operator service, per hour $20 N/A
All instruments -Ìýwith operator service, per hour $25 $125

The minimum fee for each use of a bookable NMR instrument is the minimum booking time (ten minutes).

Data processing by the NMR facility manager is charged at the same rate as operator service.

Ìý

Solid-state NMR

USAGE CATEGORY ACADEMIC INDUSTRY
Instrument time -Ìýone hour $25 $80
Rotor packing / sample prep time -Ìýper hour $25 $75
Data processing -Ìýper hour $30 $75
Instrument time -Ìýtwo hours $50 $150
Instrument time -Ìýhalf day (up to five hours) $80 $300
Instrument time -Ìýfull day (up to ten hours) or overnight (up to fourteen hours) $160 $500
Instrument time -Ìý24 hours $300 $1000
Instrument time -Ìýone week (seven days continuously) $1500 N/A

Rotor packing / sample prep time is charged when users are not present during the experiment.

Users who provide their own rotors will receive a 20% discount.

Ìý

EPR

TIME PERIOD ACADEMIC INDUSTRY
One hour $25 $125
Half day $50 $250
Full day $100 $500

All consumables (EPR tubes, liquid nitrogen, nitrogen gas, liquid helium, etc.) are charged at the rate sold by Chemistry Stores or our suppliers. A rental fee of $25 is charged for flat cell usage.

Ìý

QANUC 800

INSTRUMENT - USAGE CATEGORY ACADEMIC INDUSTRY
QANUC 800 -Ìýper hour $38 $237.50
Operator timeÌý- per hour $75 $100

All consumables (NMR tubes, solvents etc.) are charged at the rate sold by Chemistry Stores or our suppliers.

Ìý

Thermal analysis and spectroscopyÌý- Rates in effect July 1st 2025

TGAs and DSCs

INSTRUMENT - USAGE CATEGORY

ACADEMIC

Ìý

INDUSTRY

PER SAMPLE, WITH OPERATOR

DSC (Discovery 2500) - per hour $25 $250
TGA (Q50, Q500) - per hour $19 $250
TGAÌý (Discovery 5500) - per hour $25 $250
TGA-FTIR-GCMS - per hour

$35

$250
Training1 $65Ìý N/A
PER SAMPLE, WITH OPERATOR SERVICE $75 Ìý

1Training required for independent instrument operation.

Ìý

UV/Vis and FTIRÌýspectrometers

INSTRUMENT - USAGE CATEGORY

ACADEMIC

INDUSTRY

UV/Vis/near-IR (Cary 5000)Ìý - per hour $12 $250
FTIR (Spectrum II)Ìý - per hour $12 $250
FTIR (Bruker Vertex 70)Ìý - per hour $12 $250
Training1 $65Ìý $65Ìý

1Training required for independent instrument operation.

Ìý

X-ray diffractionÌý- Rates in effect July 1st 2025

Single-Crystal X-Ray Diffraction (SCXRD)1

All experiments are performed by the facility manager (hatem.titi [at] mcgill.ca (Hatem Titi)) - currently, no training is available forÌýusers.

USAGE CATEGORY

ACADEMIC

WITH OPERATORÌý

INDUSTRY

WITH OPERATOR

Determination of unit cell - per sample $40 $100
Data collection -Ìýper sample $250 $625
Full structure determination2Ìý- per sample $375 $1000
Non-routine structure determination2Ìý- per sample $500 Contact facility manager (hatem.titi [at] mcgill.ca (Hatem Titi))
ServiceÌý(data interpretation, report writing, etc.) - per hour $50 $125

1 Data collection and structure determination charges on SCXRD will be applied regardless of sample composition (e.g. starting material etc).

2ÌýAdditional charges are possible for non-routine structural determinationÌýbecause difficult cases of structure determination and refinement require considerable extra time and effort to analyze. Weakly diffracting materials, twinning, air-sensitive crystals, or crystals with highly disordered fragments and high-solvent content often belong to this category. The users will be contacted by the facility manager if samples appear difficult.

Ìý

PowderÌýX-Ray Diffraction (PXRD)

USAGE CATEGORY ACADEMIC INDUSTRY
Data collection, without operator1Ìý- per hour $30 $125
Data collection, with operatorÌý- per hour $60 $175
Variable temperature PXRD - per hour $40 $125
Service (data interpretation, report writing, etc.) - per hour $50 $150
Training $50 $150

1 Training required for independent instrument operation.

Ìý

Small and Wide Angle X-ray Scattering (SAXS - WAXS)

INSTRUMENT - USAGE CATEGORY

ACADEMIC

INDUSTRY

WITH OPERATOR

SAXS/WAXSÌý- instrument time,Ìýper hour $50 $200
SAXS/WAXS variable temperatureÌý- instrument time, per hour $60 $250
Operator time1 - per hour $70 N/A
Training2 $70 N/A

1ÌýFull service fee is instrument timeÌýplusÌýoperator support fee.

2ÌýTraining required for independent instrument operation.

Ìý

Back to top